30
31
• If you have previously opened your I LOCK IT GPS
using the I LOCK IT app, the automatic locking
function is only active if you were in the immediate
vicinity of your I LOCK IT GPS after opening it.
• If the Bluetooth connection to your open
I LOCK IT GPS gets lost, an acoustic warning tone
will sound as soon as your bike stops. An automatic
closing procedure is not carried out.
• The distance is determined by the signal strength
between I LOCK IT GPS and your smartphone.
This signal strength changes depending on the
storage of your smartphone. For example, it may
lock later when you hold your smartphone in your
hand and earlier when you carry it in your pocket.
• While riding, I LOCK IT GPS intelligently calculates
the signal strength to prevent locking even in
situations when the bike is stationary, such as at
traffic lights. Due to this calculation, the actual
distance at which I LOCK IT GPS closes, can vary.
• However, if a closing process takes place while
the phone is stationary, the distance for automatic
closing should be increased or the phone should
be stored elsewhere while riding. If this does
not help, then the recommendation is to disable
automatic locking.
OPERATION
OPERATION
LOCKING BY BUTTON
In addition to automatic closing, I LOCK IT GPS can also be
closed by pressing a button. To do this, press and hold the
I LOCK IT GPS button until it turns red and then release it.
Before closing, I LOCK IT GPS will emit an audible tone to
indicate that it is about to close. After successful locking, the
button lights up red.
The locking tone can be deactivated in the
settings menu of the I LOCK IT App.
LOCKING BY SMARTPHONE
Another option is to close your I LOCK IT GPS using the
I LOCK IT app.
To do this, click the "Lock now“ button on the home screen or
click directly on the lock graphic. Before closing the
I LOCK IT GPS will emit an audible tone to indicate that the
locking bolt is about to be closed.
The locking tone can be set in the settings menu
of the I LOCK IT app and it can be deactivated.
