46
47
FIRST SET-UP WITH I LOCK IT APP
To set up the key fob+, you must
first set up
a smartphone
on your I LOCK IT GPS.
I. Open the I LOCK IT app on the already set up
smartphone.
II. Open the settings menu and then the submenu "Key fob“.
III. Click on "Pair key fob“.
IV. Confirm the message.
V. Your I LOCK IT GPS is now in set-up mode.
VI. Press the button on the key fob+.
VII. The key fob+ LED starts flashing blue.
As soon as the key fob+ LED and the I LOCK IT GPS button
light up blue for 5 seconds, a permanent connection between
key fob+ and I LOCK IT GPS has been established.
ACCESSORIES
OPERATION
A short press of the key fob+ button establishes a connection
between the key fob+ and the paired I LOCK IT GPS (if within
Bluetooth range). As soon as the connection is established, the
key fob+ LED lights up blue for 5 seconds and an opening or
closing process takes place immediately.
When leaving the Bluetooth range (e.g. after parking and lea-
ving the bicycle) the connection disconnects and the key fob+
switches to the energy saving mode.
After pressing the key fob+ button the LED lights
up blue to confirm that a command was sent to
I LOCK IT GPS. The command can only be
transmitted if I LOCK IT GPS is in Bluetooth
range.
DEACTIVATE ALARM
If the acoustic alarm of your I LOCK IT GPS is triggered and if
there is a connection to the key fob+, the key fob+ LED starts
flashing red. The acoustic alarm can be deactivated before
30 seconds by briefly pressing the key fob+ button.
ACCESSORIES