Press and hold for 3 seconds
dial family number 2
Press and hold for 3 seconds
dial family number 3
NOTE:
1. Press button 1, 2, or 3 to answer call and press SOS to hang up.
2. 15 White List numbers can be set using Secure Tracker website. Phone can send and receive
calls and text messages only from white list phone numbers.
5.2 SOS Call
When the SOS button is
pressed for 3 seconds
the phone will activate the GPS and send a text
message to SOS numbers, (if SOS 1 is not set, then send to SOS 2, if SOS 2 is not set, then send to
SOS 3), alerting them that an SOS was triggered and it will send a map link with the GPS location.
It will then call the SOS numbers until one is answered. If any voicemail picks up on one of the
SOS numbers the phone will stop dialing the SOS numbers as the phone has detected the call as
being answered.
5.3 Check Location
You can always check the location with the Secure Tracker website. If you want to check the
location without using Secure Tracker website, send a text from one of the programmed SOS
numbers that reads POSITION# to the phone. The phone will reply with the GPS coordinates of
the current location.
5.4 Listen-In
To use the Voice Monitor function please send a text message from one of the programmed SOS
numbers that reads MONITOR# to the phone. The phone will reply “OK” and then call the
number you sent the command from and you will be able to hear the surrounding area of the
phone.
5.5 Geo-Fence
You can set a maximum of 5 geo-fence areas. When the phone enters or leaves a geo-fence
area a text message will be sent to the designated SOS numbers.
5.6 Working/ Anti-Disturb Status Setting
1. GPS Working Time
