User Manual
BOP HD8 / BOP HD16
Ref.: IR1212828 A 21.08.2009
Edition 1.0
Page 18/87
I + M E A C T I A G m b H
Additional an integrated video processor makes it possible to display several video signals
at the same time on the monitor.
A large range of monitors are available at I+ME ACTIA. We advise the only use of
monitors which are released by I+ME. You obtain detailed information from your
specialist dealer or directly from I+ME ACTIA.
2.2.3.
USB
P
ORTS
Two high speed USB ports are available to connect external devices.
Specification of the USB ports
USB 2.0
USB Type A plug
Power supply for external devices: 5V, max. 500mA (with overload protection)
Transfer rate: 480 MBit
Overload protection up to 15 kV
2.2.4.
LAN
I
NTERFACE
The Ethernet interface at the rear panel is used for
Integration of BOP HD into a network.
(streaming, broadcast, download, reviewing, ...)
Connection of an interface converter Ethernet to WLAN, GPRS, EDGE or UMTS.
Therefore such devices could be connected to the BOP HD.
The Ethernet interface equates to IEEE802.3 BaseT with automatically detection of
the transfer rate of 10/100/1000 Megabit and auto crossing. A standard network
cable with RJ45 plug can be used.
Also the web interface for the system configuration could be connected via the
Ethernet at the rear panel (see chapter 6).
See also chapter8.7
