User Manual
BOP HD8 / BOP HD16
Ref.: IR1212828 A 21.08.2009
Edition 1.0
Page 55/87
I + M E A C T I A G m b H
6.4.6.
V
IDEO OUTPUT
1
All the Video Inputs can be shown automatically in a cycle on the Video Output 1. A
reverse camera and a door camera can be defined with a display priority.
6.4.6.1
A
UTOMATIC CYCLING
Automatic cycling activates the automatic display cycle on Video Output 1, according to
the definition in the field >cycling control<. If automatic cycling is not activated, the <non
cycling video input< will be shown.
0
Automatic cycling is not active. The BOP will do one step in the >cycling
control< sequence if input #8 gets high. If digital input 8 gets low,
automatic cycling will be active anymore for about 10 seconds. After that
the >non-cycling video input< will be shown
1
automatic cycling is active
