２３
[2] Preparing the Remote Controller
Set the batteries in the remote controller.
１
Open the battery cover and set the batteries as shown below.
Always insert the batteries from the negative side first. Confirm that the negative and positive sides of the
batteries match the marks on the remote controller.
The supplied batteries are used for operation checks. Replace them with new, commercially available AAA dry
batteries at your earliest convenience.
２
Install the battery cover again.
・
The remote controller must be located within 4 to 6 m from the
remote-controller light-receiving part on the AVeL Link Player
and angled within 30 degrees vertically and 30 degrees
horizontally.
Go to "[3] Connecting the AVeL Link Player" (P.24).
Tips
Point!
Light-receiving part
30°
30°
