Basic Set-Up
06
To setup up your media player you will need to connect it to your TV set and supply power tot he VORTEX-D .
You may also wish to connect the VORTEX-D to an external hard drive or plug in a USB Flash Drive.
First of all examine the back of your TV set and locate its AV ports.
Please make sure you have the correct cables for your chosen setup.
Connecting Power:
Please ensure the power socket switch is in the off position before plugging in the power adapter to the wall.
Connect the power adapter (supplied) to the back of your VORTEX-D and plug the power into the power socket.
You will notice the VORTEX-D is working and the LED will light up blue. When you press the “standby” button on
the remote control to standby mode and the LED will light up yellow.
AV Cable:
Connecting the VORTEX-D to your TV will allow you to view multimedia in standard definition.
Using the AV lead (supplied), connect the 3.5mm jack into the 3.5mm composite port on the back of the VORTEX-D.
On the other end of the cable, plug the red, yellow and white connectors into the corresponding input ports of your TV.
Switch on your TV and select AV mode, if required.
Press the STANDBY button on the remote control to switch on the VORTEX-D.
