ISH & ISHV & ISHVS CONNECTOR Instruction Manual
Document No.
HDM-0002
6
/
29
Confidential C
Measuring method for crimp dimension is described below.
Use the micrometer shown in Fig.4 for measurement of each part.
Fig 4. Micrometer
(1)-1. Measuring method for wire barrel crimp height is described below.
To measure the wire barrel crimp height, pinch the top of the wire barrel (winding side) and the bottom of
the wire barrel with a micrometer. (see Fig.5)
Secure terminals firmly to obtain accurate measurement.
Do not pinch the bell mouth. The wire barrel crimp height can not measure accurately.
(1)-2. Measuring method for insulation barrel crimp height is described below.
To measure the insulation barrel crimp height, pinch the top of the insulation barrel (winding side) and the bottom of
the insulation barrel with a micrometer. (see Fig.6)
Secure terminals firmly to obtain accurate measurement.
Fig 5.
Wire barrel Crimp height measurement
Fig 6. Insulation barrel Crimp height measurement
Section
Do not pinch the bellmouth.
Micrometer
Section
Micrometer
