I-PEX ISH, Instruction Manual

ISH INLINE CONNECTOR Instruction Manual

Document No. 

HDM-0006 

13

  / 

22

Confidential C                                                                                                                                                                                                   

4.Terminal insertion 

①

Ensure that the terminal is crimped correctly and there is no damage, deform or dirt present. 

②

Hold the wire to insert the terminal as shown in Fig.24.

③

Insert the terminal into the corresponding corehole of the housing, as deeply as possible, in the orientation as shown in Fig. 24. 

④

Once the terminal is inserted, ensure that the terminal retention is fastened by pulling the wire lightly towards you. 

⑤

Terminals 

won’t fit into the housing coreholes, if inserted in the wrong orientation (

see Fig. 25). 

 
Notes: 

①

Terminals must be inserted in the orientation instructed. Forcibly inserting terminals in any other orientation may result in damage or 
deformation.Furthermore,if the terminals are inserted with incorrect orientation, terminal key prevents insertion into coreholes. (see Fig.25) 

②

Once the terminal is inserted, do not apply excessive pulling force to the wire. 

Fig 24. Terminal insertion direction 

Fig 25. Incorrect terminal insertion 

Hold the wire 

Polarization key (underside) 

Keys prevent incorrect insertion 

Keys prevent incorrect insertion