ISH INLINE CONNECTOR Instruction Manual
Document No.
HDM-0006
14
/
22
Confidential C
5. Secondary lock installation
①
After terminal insertion is complete, close the secondary lock part.
You will hear audible click when the secondary lock part is engaged properly.
(The secondary lock part has two engaging portions. Press down to make sure both portions are engaged)
②
Check that the secondary lock part is closed in compretely, i.e. aligned with the bottom surface of the housing.
When the secondary lock part cannot be closed in completely, do not close forcefully. Check that the terminals
are inserted correctly and sufficiently,and repeat the insertion procedure in 4. Insert all the
terminals properly, and push the secondary lock part until audible click is heard.
③
When terminal(s) is/are insufficiently inserted as shown in Fig.27, the Secondary lock part cannot be closed.
Insert the terminal(s) completely, and close the secondary lock part again.
Close
Engaging portion
Engaging portion
Fig 26. Installation of the secondary lock part
Before
After
The secondary lock part cannot be closed
Fig.27. Insufficient the secondary lock part engagement
Secondary lock part
