ISH HYBRID CONNECTOR Instruction Manual
Document No.
HDM-0009
9
/
24
Confidential C
(4) Unaligned wire barrel ends
Unaligned wire barrel ends is G <0.1mm.(see Fig.11)
※
If wire barrel ends are not aligned, resulting in different dimension of excess conductors or bellmouth between the sides,
dimensions must be measured on larger side and be satisfied.
(In the case shown in Fig.12,
measure excess conductors:[a],bellmouth:[b].)
(5) Rolling
Rolling is H<3° from the wire barrel (baseline).(see Fig.13)
Fig 12. Example of unaligned wire barrel ends
Fig13. Rolling
Fig 11. Unaligned wire barrel ends
Example
①
Example
②
