Stream
[Stream(1)]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (Stream(1))
images.
The VIQS (Stream(1)) images can be confirmed with the [Confirm] button.
•
Default:
Off
[Stream(2)]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (Stream(2))
images.
The VIQS (Stream(2)) images can be confirmed with the [Confirm] button.
•
Default:
Off
[Stream(3)]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (Stream(3))
images.
The VIQS (Stream(3)) images can be confirmed with the [Confirm] button.
•
Default:
Off
[Stream(4)]
Select “On” or “Off” to determine whether or not to activate the VIQS function for the transmitted (Stream(4))
images.
The VIQS (Stream(4)) images can be confirmed with the [Confirm] button.
•
Default:
Off
IMPORTANT
•
When the setting for “Image rotation” on the [Basic] tab is changed after setting “On” for the VIQS
setting, the VIQS area may move out of alignment. Make sure to check the VIQS setting after changing
the “Image capture mode” setting.
Note
•
Refer to “3.6.4.6 Configure the VIQS area” for setting procedure of the VIQS area.
•
When “Off” is selected for “Stream transmission” of the applicable stream, the [Confirm] button of the
stream selection will become unavailable.
100
Operating Instructions
3 Detailed Settings
