Click the “-” mark on the left of an expanded item to return to the screen displayed before the item was
expanded.
[Data encryption (Batch change)]
Select “On” or “Off” to determine whether or not to activate data encryption.
•
On:
Activates data encryption. Encrypts Stream(1), Stream(2), Stream(3), Stream(4), JPEG(1), JPEG(2),
and “AAC-LC” audio.
•
Off:
Deactivates data encryption.
•
Default:
Off
[Stream(1)], [Stream(2)], [Stream(3)], [Stream(4)], [JPEG(1)], [JPEG(2)]
Select “On” or “Off” independently for Stream(1), Stream(2), Stream(3), Stream(4), JPEG(1) and JPEG(2) to
determine whether or not to activate data encryption.
•
Default:
Off
[Encryption password], [Retype encryption password]
Set the password for data encryption.
•
Available number of characters:
4 - 16 characters
•
Unavailable characters:
" &
IMPORTANT
•
The initial password is displayed in “MAC address” on the [Upgrade] screen of the [Maintenance] tab.
When using data encryption, make sure to change the password.
•
When “On” is selected for data encryption, it is recommended to set the total bit rate of the stream
becomes 16 Mbps or less.
•
When “On” is selected, images cannot be monitored using a browser. Please use our supported
devices to monitor encrypted images.
•
The encrypted MP4 files and JPEG images cannot be viewed on the image playing screen in the
browser. Download it to a PC and use the decryption tool to confirm it.
For information about the decryption tool, refer to our technical information website <Control No.:
C0310>.
•
When “On” is selected for data encryption, “16 Screens” in the “Layout” pull-down menu on the
multi-screen becomes unselectable.
Note
•
Streams that have data encryption enabled for them are wrapped in < > in the [Live view] pull-down
menu. Additionally, streams that have data encryption enabled will be displayed with <Encrypted> in
the setup menu pull-down menu.
Example: When Stream 1 and JPEG(2) are data encrypted
128
Operating Instructions
3 Detailed Settings
