[SCD alarm]
•
On:
If the SCD (Scene Change Detection) area is not configured, the entire region is configured. To
configure the SCD area, use the [SCD area] tab on the “Alarm” page of [Detailed setting].
(
®
“3.8.5 Configure the SCD settings [SCD area]”)
•
Off:
Disables all SCD states.
•
Default:
Off
[Audio detection alarm]
Select “On” or “Off” to determine whether or not to perform audio detection.
•
On:
Perform audio detection.
•
Off:
Does not perform audio detection.
•
Default:
Off
[Alarm deactivation time]
Set the duration for which detection is not to be performed after an alarm has been detected. For example,
by using this function you can prevent mail from being sent too often when the E-mail notifications are
configured to be sent to a tablet device when an alarm is detected.
5 – 600 seconds
•
Default:
5s
[Detailed setting] tab
Displays the [Detailed setting] tab. On the [Detailed setting] tab, shifting to the detailed setting and the
operation panel setting can be configured.
[Ext. software]
Displays the “Ext. software” page. (
®
“3.3 Perform management of the extension software and the
schedule setting [Ext. software]”)
[Network]
Displays the “Network” page. (
®
“3.10.1 Configure the network settings [Network]”)
[Maintenance]
Displays the “Maintenance” page. (
®
“3.12.1 Check the system log [System log]”)
[Camera detailed setting]
Displays the detailed setting menu. (
®
Screen setting
[Color]
Select “Light” or “Dark” for the background color of each menu of the operation panel (
®
“Live” page”) and the detailed setting menu (
®
•
Default:
Light
[Operation panel layout]
Select “Right”, “Left” or “Bottom” for the layout position of the operation panel. (
®
•
Default:
Bottom
Operating Instructions
37
2 Settings
