3.4.2.7 Schedule: Set SD memory recording (video recording setup
menu)
Here, SD memory recording (H.265 or H.264) is configured according to the schedule.
[Audio recording]
Determine whether or not to perform audio recording.
•
On:
Saves audio data to videos (MP4 format).
•
Off:
Does not save audio data to videos (MP4 format).
•
Default:
Off
IMPORTANT
•
When the [Overwrite] setting is changed from “Off” to “On”, if the remaining capacity of the SD memory
card is low, old images may be deleted in order to prepare to save new images.
[Frame rate*]
Select a frame rate for the H.265 or H.264 to be recorded from the following.
–
When 30fps mode is selected for [Image capture mode]:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
–
When 25fps mode is selected for [Image capture mode]:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*/ 20fps*/ 25fps*
–
When 15fps mode is selected for [Image capture mode]:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*
–
When 12.5fps mode is selected for [Image capture mode]:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*
•
Default:
30fps*
Note
•
If you click the [Next] button, the “Transmission priority” will be set to “Frame rate”. (
®
The bit rate will automatically be set according to the selected image capture size and frame rate.
Check the set bit rate at “Max bit rate (per client)*” of each stream.
[Overwrite]
Determine whether or not to overwrite images when the remaining capacity of the SD memory card becomes
insufficient.
•
On:
Overwrites when the remaining capacity of the SD memory card becomes insufficient. (The oldest
image is the first to be overwritten.)
•
Off:
Stops saving images on the SD memory card when the SD memory card becomes full.
•
Default:
On
Operating Instructions
59
3 Detailed Settings
