[Password]/[Retype password]
Enter the password.
Available number of characters:
4 - 16 characters
Unavailable characters:
" &
Default:
None (blank)
[Remove]
When an SD memory card with a configured password is inserted, the password can be removed using the
[Remove] button.
[Password]
Enter the password.
Available number of characters:
4 - 16 characters
Unavailable characters:
" &
[Change]
When an SD memory card with a configured password is inserted, the password can be changed using the
[Change] button.
[Old password]/[New password]/[Retype new password]
Enter the password.
Available number of characters:
4 - 16 characters
Unavailable characters:
" &
[Status]
Display the configuration status of the password lock.
•
Lock:
A password is configured on the SD memory card, and the lock function is enabled.
•
Unlock:
The lock function is disabled.
Also display the password configuration status of SD memory card respectively.
•
Password is set.:
The password is configured correctly.
•
Error(Unsupported SD memory card):
A card that does not support password lock is inserted. Check
that an SDHC memory card or SDXC memory card is inserted.
•
Error(Password mismatch):
The SD memory card cannot be used because the password configured for
the SD memory card and the password configured for the camera do not match. Check that the passwords
are correct.
•
Error(Undefined error):
Displayed when an error occurs in the SD memory card. Check the SD memory
card.
Note
•
The password lock function supports only SDHC memory cards and SDXC memory cards.
•
If you will use the SD memory card on a device other than the camera with password lock configured,
remove the password using the password lock remove button before removing the SD memory card.
The password cannot be removed on devices (such as PCs) other than the camera.
•
When the “Status” of “SD memory card password lock” is “Lock”, if an SD memory card with
noconfigured password is inserted, the password is automatically configured to the SD memory card.
IMPORTANT
•
If you forget the configured password, the password cannot be removed. The SD memory card with
the configured password will become unusable, so manage passwords with great care.
•
If you forget the configured password and you want to replace the SD memory card with a new one,
perform one of the following step to set the “Status” of “SD memory card password lock” to “Unlock”
before replacing the SD memory card.
–
Use the password lock remove button to enter a password and then press the [Set] button.
Operating Instructions
69
3 Detailed Settings
