–
Initialize settings from the “Maintenance” page.
Recording stream
[Recording format]
Select the type of image data to be recorded on the SD memory card.
•
Off:
Does not record the image data.
•
JPEG(1):
Records still image data (JPEG(1)). The data is recorded in accordance with the settings of
“JPEG(1)” on the [Image] tab of the “Image/Audio” page.
•
JPEG(2):
Records still image data (JPEG(2)). The data is recorded in accordance with the settings of
“JPEG(2)” on the [Image] tab of the “Image/Audio” page.
•
Stream(1):
Records video data (Stream(1)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “Stream(1)” on the [Image] tab of the “Image/Audio” page.
•
Stream(2):
Records video data (Stream(2)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “Stream(2)” on the [Image] tab of the “Image/Audio” page.
•
Stream(3):
Records video data (Stream(3)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “Stream(3)” on the [Image] tab of the “Image/Audio” page.
•
Stream(4):
Records video data (Stream(4)) in the MP4 video encoding format. The data is recorded in
accordance with the settings of “Stream(4)” on the [Image] tab of the “Image/Audio” page.
•
Default:
JPEG(2)
IMPORTANT
•
If an SD memory card with an SD Speed Class other than 10 is used, set the bit rate of a stream
selected in “Recording format” to 6 Mbps.
•
If an SD memory card with an SD Speed Class 10 is used, set the bit rate of a stream selected in
“Recording format” to 12 Mbps.
•
For SD memory cards with an SD Speed Class 10, use a card that supports UHS-I.
(Ultra High Speed-I)
•
Use a microSD memory card dedicated to i-PRO cameras.
Note
•
When “Stream(1)” is selected, the settings for “Stream(1)” on the [Image] tab of the “Image/Audio” page
will be changed to the settings for “Stream(1) & recording”.
When “Stream(2)” is selected, the settings for “Stream(2)” on the [Image] tab of the “Image/Audio” page
will be changed to the settings for “Stream(2) & recording”.
When “Stream(3)” is selected, the settings for “Stream(3)” on the [Image] tab of the “Image/Audio” page
will be changed to the settings for “Stream(3) & recording”.
When “Stream(4)” is selected, the settings for “Stream(4)” on the [Image] tab of the “Image/Audio” page
will be changed to the settings for “Stream(4) & recording”.
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, the
settings of the following functions may be corrected.
–
When “Best effort” is selected for “Transmission priority”, “Frame rate” is set.
–
When “2s”, “3s”, “4s” or “5s” is selected for “Refresh interval”, “1s” is set.
•
When “On” is selected for “Additional info for detecting alteration”, “Recording format” cannot be
changed to “JPEG(1)” or “JPEG(2)”.
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, the
name of the saved file will be given automatically.
•
When “Stream(1)”, “Stream(2)”, “Stream(3)”, or “Stream(4)” is selected for “Recording format”, the
number of users that can access the camera may be reduced.
•
When “On” is selected for “Audio recording”, the maximum value of the available bit rate for “Stream”
will be limited.
70
Operating Instructions
3 Detailed Settings
