Image files with the following specification are available for the overlay display.
•
Image format: 8-bit bitmap (BMP: Windows format)
•
Image size: 24 pixels
´
24 pixels - 512 pixels
´
512 pixels
•
File size: 257 KB or less
Note
•
Save image files in a folder whose name does not contain a space or two-bytes code. An image saved
in a folder whose name contains a space or two-bytes code may not be uploaded.
IMPORTANT
•
Do not turn off the power of the camera or operate the camera during uploading of an image file.
•
The uploaded image to be displayed will be reduced in size depending on the resolution of live image.
Since the uploaded image could sometimes be displayed with low image quality, check the live image
page if images are displayed overlaid.
•
The images to be uploaded will be saved when they are uploaded.
[Position]
The display position of the uploaded image (upper left corner of the image) will be displayed with [X] and [Y]
coordinates.
*1 In case that [16:9] is
set for [Image
capture mode]
When [4:3] is set
for [Image capture
mode], [Y] will be
“479”
(0,0)
(639,0)
(0,359 *
1
)
upper left corner
of the image (X,Y)
uploaded image
(639,359 *
1
)
There are following two methods to change the display position of the uploaded image.
•
Drag and drop the currently displayed uploaded image using the mouse.
•
Enter coordinates to [X] and [Y] and then click the [Set] button.
Available numbers:
–
When “16:9 mode” is selected for “Image capture mode”
X: 0 – (639 minus the horizontal length of the uploaded image)
Y: 0 – (359 minus the vertical length of the uploaded image)
–
When “4:3 mode” is selected for “Image capture mode”
X: 0 – (639 minus the horizontal length of the uploaded image)
Y: 0 – (479 minus the vertical length of the uploaded image)
78
Operating Instructions
3 Detailed Settings
