3.5 Configure the basic settings of the camera
[Basic]
The basic settings such as camera title, time and date, SD memory card and the logs can be configured on
the “Basic” page. The “Basic” page has the [Basic] tab, the [SD memory card] tab, and the [Overlay image]
tab.
3.5.1 Configure the basic settings [Basic]
Click the [Basic] tab on the “Basic” page. (
®
“3.2.1 How to display the setup menu”, “3.2.2 How to operate
the setup menu”)
The settings such as the camera title, time and date, etc. can be configured on this page.
[Menu language]
Select the language to initially display when the camera is accessed from the following.
Auto/English/Japanese/Italian/French/German/Spanish/Chinese/Russian/Portuguese
•
Auto:
The language used by the browser is automatically selected. If the language used by the browser
is not supported by the camera, English is selected.
•
Default:
Auto
The language displayed on the “Live” page can also be changed. (
®
“1.1.2 About the “Live” page”)
[Camera title]
Enter the title of the camera. Click the [Set] button after entering the title of the camera. The entered title will
be displayed in the “Camera title” field.
•
Available number of characters:
0 - 20 characters
•
Unavailable characters:
" &
•
Default:
The model No. is displayed.
[Date/time]
Enter the current time and date. When “12h” is selected for “Time display format”, “AM” or “PM” can be selected.
The date and time of the PC will be obtained and set it to the camera by checking the “Set PC time to the
camera” checkbox and then clicking the [Set] button.
•
Available range:
Jan/01/2013 00:00:00 - Dec/31/2035 23:59:59
IMPORTANT
•
Use an NTP server when the more accurate time & date setting is required for the system operation.
(
®
“3.10.2.3 Configure the settings relating to the NTP server”)
[Date/time display]
Select On/Off to determine whether or not to display the date and time on an image. To hide the date and time,
select “Off”.
•
Default:
On
[Time display format]
Select the time display format from “24h” and “12h”. Enter the current hour reflecting this setting when entering
the current time and date for “Date/time”.
•
Default:
24h
[Date/time display format]
Select a date/time display format. When “2021/04/01 13:10:00” is set for “Date/time” after selecting “24h” for
“Time display format”, time & date will be respectively displayed as follows.
Operating Instructions
63
3 Detailed Settings
