Stream(1)
Stream(2)
Stream(3)
Stream(4)
2048x1536
(Fixed)
1280x960
VGA
QVGA
VGA
QVGA
VGA
QVGA
Note
•
When “90 °” or “270 °” is selected for “Image rotation” on the [Basic] tab of the “Basic” page (
rotation]), the image capture size “320
´
180” is not available.
•
When “4:3 mode(30fps mode)”, “4:3 mode(25fps mode)”, “4:3 mode(15fps mode)”, or “4:3
mode(12.5fps mode)” is selected for “Image capture mode”, “90 °” and “270 °” will become unavailable
to select.
[Transmission priority]
Select a transmission priority for “Stream” from the following.
•
Constant bit rate:
H.265 (or H.264) images will be transmitted with the bit rate selected for “Max bit rate
(per client)*”.
•
VBR:
H.265 (or H.264) images will be transmitted with the frame rate selected for “Frame rate*” while
maintaining the image quality level selected in “Image quality”. In this case, images will be transmitted with
the bit rate kept within the maximum bit rate that is set for “Max bit rate (per client)*”. The recording capacity
changes according to the “Image quality” setting and conditions of the subject.
•
Frame rate:
H.265 (or H.264) images will be transmitted with the frame rate selected for “Frame rate*”.
•
Best effort:
In accordance with the network bandwidth, H.265 (or H.264) images will be transmitted with
the maximum bit rates that are set for “Max bit rate (per client)*”.
•
Default:
VBR
Note
•
When “Frame rate” is set for “Transmission priority”, number of users who can access the camera may
be limited.
[Frame rate*]
Select a frame rate from the following.
–
When “16:9 mode(30fps mode)”, “4:3 mode(30fps mode)” or “4:3 mode(15fps mode)” is selected for
“Image capture mode”:
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps*/ 15fps*/ 20fps*/ 30fps*
–
When “16:9 mode(25fps mode)”, “4:3 mode(25fps mode)” or “4:3 mode(12.5fps mode)” is selected for
“Image capture mode”:
1fps/ 3.1fps/ 4.2fps*/ 6.25fps*/ 8.3fps*/ 12.5fps*/ 20fps*
•
Default:
30fps
Note
•
“Frame rate*” is restricted by “Max bit rate (per client)*”. For this reason, the frame rate may be lower
than the specified value when any value marked with an asterisk (*) is selected. When “VBR” is selected
for “Transmission priority”, depending on the settings of “Max bit rate (per client)*” and “Image
quality”, transmission of images may periodically be paused. Check the transmission of images after
changing settings.
•
Depending on the number users connecting at the same time or the combination of features used, the
frame rate may be lower than the configured value. Check the transmission of images after changing
settings.
•
When the frame rate is lowered, images may not be displayed normally depending on the web browser
in use.
Operating Instructions
83
3 Detailed Settings
