C
HAPTER
4
-
B
ASIC PARAMETERS
25
clipboard before it is pasted (automatically or not, see below) in
the active application. If the data is pasted automatically (default
value, see below), this method is quicker than
Keyboard
Emulation
.
If the data is not pasted automatically (see below), this allows
e.g. to change the cursor location in the active application before
the data is inserted.
Scanning multiple lines
You can scan multiple lines at the same time and send them to
the clipboard. In this case, you will operate exactly as for single
lines: scan then
paste
the data manually in the active application.
To scan multiple lines, tick the option
Multiple Lines
from the
Settings
menu.
•
If you have selected
Clipboard
as output target, you have access
to the following advanced options via the button
Choose the
output target
in the IRISPen
Palette
or the command
Options
from the
Settings
menu. Select the required options and values,
then click on
OK
to confirm.
Include font and size
You can determine the font and the size of the data to be inserted
in the active application. Tick the button
Include font and size
and select the required font and size via the arrows on the right.
Paste automatically
(default value)
If this option is selected, the software automatically pastes the
data that has been sent to the clipboard in the active application.
