i.safe MOBILE IS-RSM1.1, Quick Start Manual

EN

7

6

cket of the power adapter . After charging, please disconnect the i.safe PROTECTOR 

USB cable from the power adapter .

 BATTERY USE

In actual use the run time of the device varies with the network status, working envi- 

ronment and usage . If you do not charge for a long time, the device will be powered 

off automatically .
WARNING

The device may only be charged at ambient temperatures in a range from 5°C … 35°C . 

Please do not use charging equipment if the temperature exceeds this range .

POWERING ON/OFF THE IS-RSM1.1

Press the 

[Power key]

 until the blue LED lights up . A tone will confirm the readiness . 

Press the 

[Power key]

 again and a tone will confirm the powering off .

PAIRING IS-RSM1.1 WITH YOUR DEVICE

In the powering OFF mode, press and hold the 

[Power key]

 for about 8 seconds .  

When the IS-RSM1.1 has entered the pairing mode, the indicator light flashes red  

and blue alternately . 
Turn ON the Bluetooth on your mobile device and search for the IS-RSM1.1 . Select  

and match . When LED indicators turn to blue, the pairing succeeds .

KEYS AND SPECIAL FEATURES 

(see illustration on page 2)

1 

POWER KEY: Power ON/OFF the IS-RSM1.1

2 

EARPHONE JACK: The built-in speaker will be shut down automatically when 

the earphone is plugged in . Do not open the earphone ack in hazardous areas .

3 

RESET KEY: Press to restart the IS-RSM1.1

4 

VOLUME UP KEY: To control the volume up .

5 

VOLUME DOWN KEY: To control the volume down .

6 

USB-PORT: To connect the delivered USB cable for charging .

7 

CHARGING CONTACTS: For charging with the optional desktop charger .

8 

 PTT KEY: Long press for speaking and use PTT (for example BPER) .

9 

SOS KEY: To trigger the One-Button-Alarm on Mandown-Detection-APP 

(supported phone models and application provided!) .

RECYCLING

The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging  

reminds you that all electrical and electronic products, batteries, and accumulators 

must be taken to separate collection at the end of their working life . This requirement  

applies in the European Union . Do not dispose of these products as unsorted municipal  

is prohibited . This device may affect proper work of medical equipment, such  

as pacemakers, so always keep a distance of at least 15 cm between the device and  

these devices .

 Observe all corresponding laws that are in force in the respective countries regarding 

the use of devices while operating a vehicle .

 Please power off the device and disconnect the charging cable before cleaning  

the device .

 Do not use any chemical cleaning agents to clean the device or the charger .  

Use a damp and anti-static soft cloth for cleaning .

 Do not discard old and abandoned lithium batteries into the trash, send them  

to designated waste disposal locations or return them to i.safe MOBILE GmbH .

WARNING

i.safe MOBILE GmbH will not assume any liability for damages caused by disregarding  

any of these advices or by any inappropriate use of the device .

I.SAFE PROTECTOR

The IS-RSM1.1 contain specially designed safety circuits . Connecting the charger  

to non-ex-approved equipment like a computer can endanger the safety of the 

device, as faults in the non-approved equipment could lead to a power surge into  

the device large enough to destroy the safety circuits .
The i.safe PROTECTOR is a USB cable for connecting the device with non-ex- 

approved equipment . It contains additional safety circuits to protect the device  

from possible faults in the non-ex-approved equipment .
For this reason, charging and data connection is only allowed using the i.safe 

PROTECTOR .

MAINTENANCE/REPAIR

Please note any legal requirements for periodic inspection .
The device itself has no user-serviceable parts . It is recommended to perform  

inspections according to the safety regulations and advises .
If there is a problem with the device, please contact your vendor or consult the service 

center . If your device is in need of repair, you can either contact the service center or 

your vendor .

BATTERY

The battery in this device is not removable by the user . The battery is not fully charged 

when the device is purchased, but it contains enough energy to power on the device . 

To obtain best battery performance and battery life, let the battery discharge comple-

tely before charging it completely for the first three charging cycles .

 CHARGING THE BATTERY

Connect the i.safe PROTECTOR USB cable to the USB connector at the bottom of  

the device . Connect the other side of the i.safe PROTECTOR USB cable with the so-