EN
5
DEVICE OVERVIEW
3
1
4
2
1
HOLDER:
Holder for
IS530.M1
.
2
PLUG:
Connecting
IS530.M1
.
3
MAGNETIC CHARGER PORT:
Connection for the
i.safe PROTECTOR 3.0
Magnetic
Charger Cable (included in the
IS530.M1
package) for charging the
IS530.M1
.
4
THERMAL CAMERA:
Recording temperatures.
SAFETY
Read the “Safety” section of this Operating Manual carefully before using the device. If you
do not follow these instructions or do not understand them, this could lead to death, severe
injuries and damage to the device.
USER
Only trained users who are qualified in the use of Ex devices in explosion hazardous areas and
who have read and understood this Operating Manual may use this device.
EX-RELEVANT SAFETY REGULATIONS
Use of this device assumes that the operator observes the conventional safety regulations and
has read and understood Operating Manual, Safety Instructions and certificate. When used in
explosion hazardous areas, the following Safety Instructions must also be complied with:
To ensure the IP-protection, it has to be ensured that all gaskets are present
and functional. There must be no large gap between the two halves of the housing.
The device must be securely fastened to the ISM interface when used in ex-hazardous areas.
The device may not be exposed to any aggressive acids or alkalis.
The device shall be protected from the exposure of oils, greases and hydraulic fluids.
Summary of Contents for IS-TC1A.M1
Page 1: ...IS TC1A M1 OPERATING MANUAL SAFETY INSTRUCTIONS MODEL MTC1A01...
Page 10: ...112...
Page 14: ......
