Quick Start
12
6.4
Pair and Connect the Headset
1. Ensure that your mobile device is switched on and the
headset is turned off.
2. Press and hold the power key (for about 5 seconds) until
the blue indicator light starts to flash quickly.
3. Within about 3 minutes, activate Bluetooth connectivity on
your device, and set it to search for Bluetooth devices.
4. Select the headset from the list of found devices.
5. If necessary, enter the passcode 0000 to pair and connect
the headset to your device. In some devices, you may need to
make the connection separately after pairing.
When the headset is connected to your device and is ready
for use, the blue indicator light flashes about every 5 seconds.
7
Basic Functions
7.1
Wearing the Headset
Place the headset on your ear. The headset is ready to be
used on the left ear. To use the headset on the right ear, ro-
tate the ear loop so that it is to the right of the i.safe MOBILE
logo. Slide the ear loop behind your ear and gently push the
earpiece against your ear. Push or pull the ear loop to set its
length. Point the headset with the microphone (7) towards
your mouth.
7.2
Calls
To make a call, use your mobile device in the normal way
when the headset is connected to it.
To redial the number you last called (if your device sup-
ports this feature with the headset), when no call is in pro-
gress, press the answer/end key twice.
To activate voice dialing (if your device supports this fea-
ture with the headset), when no call is in progress, press
and hold the answer/end key for about 2 seconds. Proceed
as described in the user guide of your device.
