i-SENS CareSens II, Owner'S Booklet

12

13

Meter Memory

[3]

After checking the stored test results, 

press 

M

 button to turn off the meter.

[1]

Press the 

M

 button to turn the meter on. 

The current date and time will be displayed 

on the bottom of the screen for 2 seconds, 

followed by the average value and the 

number of the test results saved within the 

14-day.

[2]

Use the 

C

 button to scroll through the 

test results, starting from the most recent to 

the oldest.

The 

CareSens II

 Meter can save up to 250 glucose 

test results with time and date. If the memory is 

full, the oldest test result will be deleted and the 

latest test result will be stored. The 

CareSens II

Meter calculates and displays the averages of 

total test results from the last 14 days.

In this mode all the results stored in the 

meter can be deleted. Please note that if you 

select YES, all the stored test results will be 

deleted and can not be restored.

After the unit is set, press the 

M

 button to 

enter the ‘Test Result Reset’ mode. The ‘dEL’ 

character will blink on the screen. Press 

C

button to alternate between ‘YES’ or ‘no’. To 

delete all the stored test results, press the 

M

button while the screen displays ‘YES’. Then, 

all the test results stored in the meter will be 

deleted and the screen will be similar to the 

picture on the right.

If you do not want to delete the results, press 

the 

M

 button while the screen displays ‘no’. 

Then, the screen will return to step 1. See 

page 9.

• Note

At any stage, if the 

M

 button is pressed for 3 seconds, Date, Time 

and Unit setting mode will finish and the meter will be turned off. 

Press and hold 

C

 button to scroll through numbers quickly.

Setting the ‘Test Result Reset’

(Deleting all the saved test results)