background image

20

   www.i-sens.com

www.spirit-healthcare.co.uk  

21

Note:

The TEE2 Control Solution can be purchased separately. 

Please contact Spirit Healthcare on 0800 881 5423.

Caution: 

The range printed on the test strip vial is for the TEE2 

Control Solution only. It does not have any connection to 

your blood glucose level.

Step 3 

A test result will appear after the meter counts 

down from 5 to 1.

After your control solution result appears on 

the display, press 

C

 

for 3 seconds till the ‘check’ 

symbol appears on the display.

When the ‘check’ symbol is displayed, the result 

is stored in the meter’s memory and is not 

included.

Step 4

 

Compare the result displayed on the meter

to the range printed on the test strip vial.

The result should fall within that range.

Used strips should be discarded safely in

disposable containers.

Comparing the Control Solution Test Results

The test result of each control solution should be within the 

range printed on the label of the test strip vial. Repeat the 

control solution test if the test result falls outside of this range. 

Out of range results may occur due to the following factors:

If results continue to fall outside the range printed on the test 

strip vial, the TEE2 Test Strip and Meter may not be working 

properly. Do not use your system and contact Spirit Healthcare 

24/7 Freephone Support Line at 0800 881 5423.

Situations
•  When the control solution bottle was 

not shaken well,

•  When the meter, test strip, or the control 

solution were exposed to high or low 

temperatures,

•  When the first drop of the control 

solution was not discarded or the tip of 

the bottle was not wiped clean,

•  When the meter is not functioning 

properly.

•  When the control solution is past the 

expiration date printed on the bottle,

•   When the control solution is past its 

discard date (the date the bottle was 

opened plus three (3) months),

•  When the control solution is 

contaminated.

Actions

Repeat the

control solution

test by referring

to the “Notes”

on page 18.

Discard the used

control solution

and repeat the

test using a new

bottle of control

solution. 

Summary of Contents for TEE2




























Reviews: