6
Alarm Functions
If the alarm is set, when the set alarm time is reached, all other
functions are stopped, and the alarm sound starts, and continues
for an hour unless cancelled.
While the alarm is sounding, the lighting touch controls are
inoperative. During operation the alarm volume will increase
gradually.
To stop the alarm completely press the (2) button. Alternatively
press the
(4) snooze button to suspend the alarm for 10
minutes. After 10minutes the alarm will restart and continue for an
hour or until cancelled. The snooze function can be used repeatedly.
During the alarm, press any of the following buttons / / /
/ to stop the alarm sound and operate the normal function
for that button.
During snooze,
ZZ
will be displayed, press the (2) button
to cancel snooze and the alarm. Other buttons will not cancel
snooze, just operate the normal function related to that button.
Wake-Up Lamp Functions
The wake-up lamp sequence operates when the alarm is set to
mode to 01 or 03.
Depending on the wake-up light duration you have chosen you
will need to set the wake-up time at least 10, 20 or 30 minutes
before the alarm time.(If the wake-up time is set too close to the
alarm time the wake-up function will not respond).
All other functions will be suspended when the wake-up sequence
starts.The light will brighten gradually through ten levels of
brightness. When the alarm time is reached, the light will be at its
brightest.
During the wake-up sequence, press (2) to freeze the light level.
Turn off the wake-up and alarm functions so that the alarm icon is
no longer displayed, you will now be able to manually adjust the
lighting using the touch controls.
During the wake-up sequence, other buttons are inoperative, the
touch keys are inoperative, and other functions will not respond.
www.philex.com
