FM Function
In clock mode, press the button (3) to access the radio.
Press button (3) for 3 seconds to start auto scanning from low
to high frequencies. This process will auto-save up to 40 preset
stations and replace any previous listing.
When the radio is on press or buttons (5, 6) to browse
through preset stations. Press or buttons (5, 6) for 2
seconds to quickly search for the next station. Short press or
buttons (5, 6) to stop searching. Press the button (3) to exit
the radio setting mode.
Press the or
buttons (7, 8) to reduce or increase volume.
While in radio mode, the display will revert to the clock after 5
seconds of inactivity. A radio icon will also appear indicating that
the radio is playing in the background.
Sleep/Sunset Sequence
This function can be set at bedtime, when set, the light initially
switches on at full brightness then gradually dims through 10
levels of brightness over the time period selected and finally
switches off.
In normal clock mode, press the touch control (9) to enter the
sunset setting mode, the icon and the default sunset time period
(10 minutes) will be displayed.The icon will flash, press the /
touch controls (11, 12) to select a sunset time period
OFF/10/20/30
,
after 5 seconds the display will return to clock mode and the sunset
sequence will start if 10, 20 or 30 minutes has been selected.
If the FM radio is playing when the sunset sequence is started, it
will switch off together with the light at the end of the time period.
During the sunset sequence the light’s brightness will gradually
decrease in intensity. Press the / touch controls (11, 12) to
control the brightness manually. This will cancel the gradual
dimming function. However, the light will still switch off at the end
of the time period set.
During sunset mode press the touch control (9) to cancel the
sequence.
7
www.philex.com
