17
4
Transport and storage
4.1
General
CAUTION
Always keep the main body of the co-botic
TM
45 in the upright position. Make
sure the clean water tank and recovery tank are part of the main body during
transport.
Before storage or transport, drain the machine. Remove the battery after each use.
4.2
Store position
The correct store position is the upright vertical position. When stored, the clean water tank
and recovery tank should be installed in the main body.
4.3
Transport inside/outside
CAUTION
The wheels of the co-botic 45 are not designed to roll over dirty surfaces. Sand
can cause the wheels to block. Lift the co-botic 45 while moving it from one
building to another.
CAUTION
The co-botic 45 is heavy. Do not try to carry the unit by yourself. You should
always use someone's help.
When transporting the co-botic 45 inside:
1.
Put the co-botic
45 in store position.
2.
Move the co-botic 45 to its destination
using the handle (Figure 9, pos. 1), or the
carrying handle on both sides
(Figure 9, pos. 2).
When transporting the co-botic 45 outside:
1.
Put the co-botic
45 in store position.
2.
Carry the co-botic 45 to its destination,
using the carrying handle on both sides
(Figure 9, pos. 2).
Figure 9
TIP: Dry the tanks
Slightly open both tank caps before storage to allow the tanks to dry.
