21
6
Operation
6.1
Before you start
Before operating the co-botic
TM
45, make sure that:
•
The battery of the co-botic 45 is installed, see section 5.2.2, and fully charged, see the
manual of the battery charger;
•
The battery of the remote control is fully charged, see section 5.2.3;
•
The clean water tank is filled with clean water, see section 6.1.1.
•
You have checked the brush and squeegee for wear and tear, see chapter 7.
6.1.1
Filling the clean water tank
1.
Push the unlock button (Figure 13, pos. 1)
to unlock the clean water tank.
You will hear a clicking sound when
unlocking the clean water tank.
Figure 13
Now you can remove the clean water tank
from the co-botic 45.
2.
Use the blue handles (Figure 14, pos. 2)
on both sides of the clean water tank
(Figure 14, pos. 3) to further unlock and
slide out the clean water tank.
Figure 14
