36
6.8.3
Cleaning the roller brush and squeegee blades
Clean the roller brush and squeegee after
each cleaning task or on a daily basis.
1.
Open the lid of the roller brush and
squeegee holder compartment
(Figure 33, pos. 1).
2.
Pull the roller brush and squeegee holder
out of the compartment
(Figure 33, pos. 2), along the top side rail.
3.
Turn over the roller brush and squeegee
holder.
4.
Check to see if the squeegee blades
(Figure 33, pos. 3) are clean and intact.
5.
Clean the squeegee blades under fresh
water, wipe the squeegee blades with a
clean, damp cloth. Replace them if
necessary,
see section 0 for removal instructions.
6.
Check to see if the roller brush
(Figure 33, pos. 4) is clean and intact.
7.
Remove hair and/or residual dirt from
both the roller brush itself and from the
roller brush chamber. Clean the brush
under fresh water or replace it if
necessary, see section 7.6 for removal
instructions.
Figure 33
After cleaning the roller brush and squeegee
blades:
8.
Turn over the roller brush and squeegee
holder.
9.
Replace the roller brush and squeegee
holder (Figure 34, pos. 2) in the
compartment, along the top side rail.
10.
Close the lid of the roller brush and
squeegee holder compartment
(Figure 34, pos. 1).
Figure 34
