19
7
Maintenance
7.1
Cleaning
7.1.1
Rinsing the injector
Rinse the injector once a week under tap water.
1.
Turn the injector (Figure 14, pos 1)
counterclockwise to remove it from the
solution tank.
2.
Dispose of the old pod responsibly. See
section 6.1.
Figure 14
3.
Rinse the injector with tap water
(Figure 15, pos 1).
4.
Turn the injector clockwise to replace it on
the solution tank.
Figure 15
7.1.2
Cleaning the exterior
Clean the exterior of the solution tank and injector once a week with a non-abrasive, non-solvent
cleaner or clean it with a slightly damp cloth.
WARNING
Before you start maintenance, replacing parts or cleaning;
Turn off the i-mop® and
remove the batteries.