16
6
Operation
ATTENTION
•
The i-dose system is only intended to be used in combination with the i-mop® floor
scrubber family;
•
Always place the pod with logo pointing upwards.
1.
Fill the solution tank (Figure 8, pos 1) with
tap water.
2.
Attach the solution tank (Figure 9, pos 2) to
the i-mop® (Figure 9, pos 1).
3.
Ensure that the injector (Figure 9, pos 3) is
attached to the solution tank
(Figure 9, pos 2).
Figure 8
Figure 9