19
3
Safety
Safety comes first. Therefore, please take time to read and understand these safety instructions.
Improper use can cause harm or void the manufacturer’s warranty.
3.1
General safety instructions
3.1.1
Sweep before scrub
Remove objects from the floor that can be propelled by the rotating disc brushes. In case of fire, use
a powder extinguisher instead of water. Keep all protective and safety measures in place.
3.1.2
Disc brush condition
Make sure to check the condition of the disc
brush before use. Check the red indictor mark
before you start (Figure 9, pos 1). See section
7.4.4. Make sure the machine is completely
turned off when replacing the disc brushes.
Figure 9
3.1.3
Batteries
To charge the batteries, always use the automatic battery charger provided by the manufacturer.
CAUTION
During normal operation, the 24 V batteries in itself cause no safety hazard. Please keep
in mind the following safety instructions:
•
DO NOT
crush, pierce or damage in any way;
•
DO NOT
heat or incinerate;
•
DO NOT
short-circuit;
•
DO NOT
dismantle;
•
keep the batteries dry;
•
keep away from sparks and flames;
•
only charge between 5 °C ~ 40 °C/41 °F ~ 104 °F;
•
only use between 5 °C ~ 40 °C/41 °F ~ 104 °F.
