18
5.2
Assembly
5.2.1
Charge the batteries
Charge the batteries according to the instructions in the battery charger manual. Make sure the
battery packs are charged monthly.
5.2.2
Attach the brushes
To attach the brushes:
1.
Put the i-mop® XL Plus in park position (refer to section 4.2).
2.
Hold the scrub deck firmly with one hand.
3.
Align the left brush (Figure 9, pos 1) with the left motor disk (Figure 9, pos 2). Align the latches
and cut-outs in the brush and motor disk.
4.
Push the brush on the motor disk.
5.
Turn the left brush clockwise until you see the motor disk turning. The brush is now in place.
6.
Align the right brush with the right motor disk. Align the latches and cut-outs in the brush and
motor disk.
7.
Push the brush on the motor disk.
8.
Turn the right brush anticlockwise until you see the motor disk turning. The brush is now in
place.
Figure 9