16
5.3
Replacing the dust bag
Check the dust bag every week and replace it if it is full. Only use original i-team dust bags.
•
unplug the main power cable before replacing the dust bag;
•
make sure that the hose is removed from the i-vac 5® before removing the dust bag
. You
cannot remove the dust bag with the hose in place.
1.
Turn off the i-vac 5 with the ON/OFF switch
(Figure 8, pos 1).
2.
Remove the hose ( Figure 8, pos 2).
3.
Release the latches (Figure 8, pos 3).
4.
Lift the head by the handle (Figure 8, pos 4).
5.
Place the head on its side on a level surface
(Figure 9, pos 1).
Figure 8
Figure 9
