20
6
Operation
6.1
Before you start
1.
Make sure that the main power cable is
placed in the cable strain relief (Figure 15,
pos 1).
2.
Make sure that the main power cable is not
damaged. Pull it through a fiber cloth.
3.
Make sure that the dust bag is placed in the
i vac 5®, (see 5.2).
4.
Make sure that you have the correct tool for
the intended purpose, see Figure 2.
5.
Check the brush from the tool for wear and
tear.
6.
Make sure the motor filter is clean (see 7.2).
Figure 15
6.1.1
Height adjustment
1.
Add or remove a section of the wand
(Figure 16, pos 1) to adjust the length
Figure 16
