background image

 

 

 

Preface 

Thank you for purchasing the i-vac 5®. The i-vac 5 has an egg shaped canister so you can work 

optimal in smaller areas and carry it close to your body. All of the accessories and necessary 

equipment supplied with the machine can be stored on the machine. 

 

The i-vac 5 is easy to use when you follow the instructions. Please read the user manual carefully. 

Become familiar with the correct operation and maintenance procedures. Store the manual in a safe 

place. The manual is an essential part of the i-vac 5 and must be handed over to the new owner upon 

resale or exchange. Each i-vac 5 has a unique identification number that can be found on top of the 

main body. Your i-team partner needs this number when you order parts. 

 

When this manual refers to “the manufacturer” this means: Future Cleaning Technologies B.V.,

 

an 

affiliate company of i-team

 

in Eindhoven, the Netherlands. When this manual mentions “the partner” 

your local i-team resell and support service partner is referred to.  

Purpose of the user manual 

The purpose of the user manual is to provide the user with information during the life of the i-vac 5 

in such a way that the i-vac 5 is used correctly, efficiently and safely, even in the event of reasonably 

foreseeable misuse. 

 

The user manual contains instructions regarding: 

 

 

personal operator safety; 

 

intended and non-intended use of the i-vac 5; 

 

instructions for daily use; 

 

maintenance instructions; 

 

storage conditions; 

 

disposal of the i-vac 5. 

These instructions must be considered to avoid risks that could lead to physical and/or material 

damage. 

Target audience 

This user manual is intended for operators of the i-vac 5 and their supervisors, as well as partners 

and importers.  

Operators of the i-vac 5

 

The i-vac 5 may only be operated by a person who: 

 

 

has correctly read and understood the instructions in this manual; 

 

is trained by an experienced operator who has read and understood the instructions in this 

manual. 

 

 

Summary of Contents for i-vac 5






























Reviews: