FR
A
NÇ
A
IS
DESCRIPTION DE LA STATION D’ACCUEIL
Tableau antérieur
: LED Power
Tableau postérieur
– de la gauche vers la droite:
1x connecteur d’alimentation, 1x port USB 3.0 type B, 2x USB 3.0 + 4x ports USB 2.0 type
A, 1x port HDMI, 1x port DVI-I, 1x port RJ45 Ethernet 10/100/1000 Mb/s
EXIGENCES DU SYSTÈME
1)
Exigences Hardware: ordinateur, portable avec un port USB 3.0 libre. Si vous disposez
d’un port USB 2.0/1.1, la vitesse du transfert sera limitée. Processeur Intel Pentium 1.2
GHz et supérieur, 512 MB RAM
2)
Système opérationnel : Windows XPSP3 / Vista 32_64 bit/ Win7 / 8 32_64 bit
3)
Pour la lecture des DVD sur un moniteur secondaire, il faut disposer d’un processeur
Intel Pentium 2.0 au minimum ou supérieur, 1GB RAM et régler la résolution d’écran à
800 x 600 et 16 couleurs.
Note:
a) L’installation des ports audio et des concentrateurs HUB USB (pour les ports USB 2.0 du
type A) se fait automatiquement à partir du système ; les autres dispositifs – ports sont à
installer à partir du CD fourni.
b) Le port 10/100/1000Mb/s LAN et les ports Vidéo (Display) sont à installer pour la
première fois avant le raccordement même de la station d’accueil à l’ordinateur/portable
à partir du CD fourni (ou bien il est possible de télécharger les pilotes du site www.i-tec-
europe.eu) et après connecter la station d’accueil.
INSTALLATION SOUS WINDOWS XPSP3 / VISTA
/ 7 / 8 (VERSION 32_64BIT)
Lors de la première utilisation, ne pas connecter la station d’accueil à l’ordinateur/
portable avant d’installer les pilotes correspondants pour le port LAN et Vidéo
(Display) à partir du CD fourni. Les pilotes doivent être installés uniquement lors de
la première utilisation.
Insérer le CD pilotes dans le lecteur (ou bien télécharger les pilotes du site www.i-tec-
europe.eu) et installer les pilotes. Procéder de manière suivante:
Pour le port LAN et Vidéo (Display) – sélectionner l’installation à partir du CD, fichier
Setup.exe
du dossier disponible sur le CD:/ - dans le système, LAN est visualisé sous
Administrateur de l’équipement - Adaptateurs de réseau comme «
USB 3.0 to Gigabit»
et
pour l’écran sous Administrateur de l’équipement - USB Display Adapters comme
«DisplayLink Display Adapter»
et
«USB Dual Head Display Adapter»
.
Note pour installation du port Vidéo (Display): l’installation se réalisera en plusieurs étapes.
Pour le système opérationnel Vista/7/8 procéder à l’installation en qualité d’utilisateur
Administrateur et après l’installation redémarrer l’ordinateur/portable;
a) au cours de l’installation des pilotes, l’écran peut clignoter ; il s’agit d’un processus
normal.
b) nous recommandons de redémarrer l’ordinateur après avoir terminé l’installation de
pilotes.
FR
24