INTRODUCTION
This USB Display Adapter convert USB2.0 to graphic output V
GA
. It enables you to connect
one more monitor, LCD or projector
with VGA-output
to a computer with a USB 2.0 port. Can be
used in your office (for graphic designer, financial department,...), you can use it for making
multiple screen presentations, on fairs or for your home-use (entertainment). Adapter supports
FullHD resolution 1920x1080 pixels.
PACKAGE CONTENT
1) USB 2.0 Display Adapter FULL HD
2) USB cable - 1 m length (one side is connector type A, second is MiniUSB) – enables
connect adapter to PC/NB
3) Driver CD
4) User’s manual
SPECIFICATION
1) USB 2.0, powered by USB, do not need external power source
2) VGA
3) RAM: 512 MB
4) Supported Resolutions: 640x480, 800x600, 1024x768, 1280x960, 1280x1024,
1360x768, 1366x768, 1368x768, 1400x1050, 1440x900, 1600x1200, 1680x1050,
1920x1080
5) Dimension: 84.3 (L) x 54 (W) x17.8 (H) mm
6) Working temperature: 10-40
º
C
7) Supported Modes: Extend (Default), Mirror, Primary Display
8) Supported colors: 16 / 32 bit
SYSTEM REQUIREMENTS
1)
Hardware:
PC, one available USB 2.0 port. If you have USB 1.1, the transfer speed will be
slower. Processor Intel Pentium 1.2 GHz or higher, 512 MB RAM (we recommend
processor Intel Pentium 2.0GHz or higher and 1GB RAM).
2)
OS:
Windows 2000 SP4, Windows XP SP2 32bit, Windows Vista 32/64bit, Windows 7
32/64bit, Windows 8 32/64bit, Windows 8.1 32/64bit, Mac OS X
Note:
There is a description of installation in Win XP; in Win 2000 / Vista / 7 / 8 / 8.1 it is similar,
just screens may differ.
DRIVER INSTALLATION IN WINDOWS XP/VISTA
Do not connect the adapter to your computer before installing the provided driver.
1) Insert the provided driver CD into CD-ROM drive and double-click the SETUP.EXE file
under the Driver folder.
2) Then follow the on-screen prompts to complete the installation.
For Windows Vista you should install the program as Administrator and then restart your
PC/NB;
For Win 2000 OS: if prompted for system patch after running the setup file, please
download and install the required patch first. After that, execute the setup file again to
install the driver.
3) Connect the smaller end of the USB cable to the adapter. Then connect the other end of
the cable to an USB 2.0 port on your computer. After the connection, Windows will
automatically complete the installation.
4) Then we recommend the restart of your PC again.
i-tec USB Display Adapter
EN
02
N
G
S
E
L
I
H
