background image

f) Daylight Saving:

 Check this box to add one hour. 

g) Reboot Time:

 The signage player will reboot at specified time if box is 

checked. This option can be useful when you need to update the signage 
playerʼs playlist and media contents because upon a reboot, the client player 
will automatically check for latest playlist version if autostart is enabled for 
HTTP URL update (explained below). 

h) Device On:

 The signage player will turn on video at specified time. 

i) Device Off:

 The signage player will turn off video at specified time. 

j) Video output:

 Options include S-Video (composite), and VGA. With the 

remote control, use the

 Angle

 key to cycle between modes. 

k) Off/Local CF/HTTP URL Address:

 When the signage player boots up 

initially, it will execute one of three commands depending on this option.

 OFF 

will pause the signage player to wait for next command.

 Local CF

 will 

autoplay any media content on the CF card based on local playlist.

 URL 

Address

 will specify the signage player to goto this URL and download/update 

playlist and any new media content subsequently. 

l) Update Client:

 This is a remote command to update the signage player with 

a new autoconfig.mia file. It will send this file to the signage player and these 
new settings will be saved in EEPROM. It will take approximately 20-30 
seconds to reboot. 

Summary of Contents for CMP2000N

















Reviews: