Getting Started
To use your i.Oval 303 Bluetooth headset (“headset”), please follow the steps
below:
1. Ensure your headset is fully charged.
2. Pair your charged headset with a Bluetooth-enabled mobile phone.
Charging Your Headset
The headset comes with a built-in rechargeable battery. Prior to using the
headset for the first time, it is recommended to fully charge the battery.
Insert the charger’s plug into the headset’s charging socket (see fig.2) and plug
the mains charger to an AC wall outlet or plug to the PC/notebook.
Use only the supplied charger / USB charging cable to charge the headset.
Charge Plug
Charging Socket
fig.2
Charging Your Headset
5
6
♦
Charging indication will be delayed for a few seconds if the headset has not
been used for a long time or the battery is drained.
♦
3 hours are required to fully charge the headset.
Indicator Light
Headset Status Status Indicator Light (fig.1)
• Charging
• Fully charged
• Low battery
• Out of battery
• Out of Range
• Long Green
• The light turns off
• Double flash Green
• The light turns off
• Flash 4 Green every 15 sec until headset
reconnect and timeout after 10 mins
Talk and Standby Time
A fully charged battery can offer up to 4.5 hours of talk time and up to 90
hours of standby time. The headset remains in standby mode after being
turned on.
Pairing Your Headset with a Bluetooth Mobile Phone
1) Ensure the headset is off.
2) To activate the pairing mode, press and hold the headset’s MFB without
releasing your finger until its status indicator blinks green.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select
“i.Oval 303” and enter the passcode “0000”. When the pairing is completed,
the headset’s status indicator will flash green light rapidly five times.
7
8
