According to the previous OSD, port 1 of the Master Switch is cascaded. In order to access
the Slave Switch, move the highlight bar to port 1 and press [ENTER] to access the slave switch.
4. Press [SCROLL LOCK] key twice within two seconds.
5. Key in [SPACE].
6. Move the highlight bar from 1 to 8 to select the desired computer and press ENTER
Note: the JKP1 series is designed for 2 levels of cascading only.
Returning to the Master Switch Using OSD
1. Invoke the Hot key mode by pressing the [SCROLL LOCK] key twice within two seconds.
2. Key in [SPACE]
3. Key in [Home]
Note: After switching back to the Master switch, port 1 of the Master switch is always the first to be shown.
SPACE SPACE - ADMIN
To access the Administration sub-menu press [SPACE], [SPACE] from the main OSD menu. (see next
section for details).
115-801e/817/115-1601e/117-1601e
