Reset PC Name
This function resets PC Name settings to default values.
Quick View Scan Mode
The Quick View Scan feature allows you to monitor the activity of the connected computers at regular
intervals so that you can monitor the computer activity without having to take the trouble of switching
yourself. This time interval can be changed as desired.
Note: 1.The interval between these two keys should be no more than 0.5 seconds. Once the scanning begins, it continues
until you press any key to exit Quick View Scan Mode.
2. A Port LED will flash indicating that the connected computer is under Auto Scan mode.
Setting the Quick View Scan Time
The scan time or the time the Switch spends on each port can be changed using either Hot Keys or OSD.
Password Security – Locking Server Access
Administrators can set a unique password to restrict access to computers connected to the JKP1 switch.
Changing your Password
To set a new password, do the following:
1. Invoke the Hot Key mode by pressing the [SCROLL LOCK] key twice within two seconds.
2. Key in [R]
3. Enter old password (up to 15 characters).
4. Enter the new password (up to 15 characters).
5. Re-enter the new password for confirmation.
Hotkey Beeper Confirmation
The beeper function can be turned on and off as desired using the following Hotkey sequence:
