5. Volume Up
•
Adjust Volume Up
•
Reject / Transfer a call
6. Volume Down
7. Lock Key
Charging Your Headset
The headset comes with a built-in rechargeable battery. Prior to using the headset for
the first time, it is recommended to fully charge the battery.
Insert the charger’s plug into the headset’s USB charging socket and plug the mains
charger to an AC wall outlet or plug to the PC/notebook.
Use only the supplied charger / USB charging cable to charge the headset.
Quick Charge
Charging the headset for 15 minutes can provide 1 hour talk time.
Headset Status
Status Indicator Light
•
Charging (OFF MODE)
•
Fully charged (OFF MODE)
•
Low battery
•
Charging (STANDBY MODE)*
•
Fully charged (STANDBY
MODE)*
•
Solid red
•
Off
•
Blinking red 3 times with beep
every 5 minute
•
Solid red
•
Off
♦
3 hours are required to fully charge the headset.
*Warning: Do not use the headset while it is connected to the charger.
Pairing Your Headset with a Bluetooth Mobile Phone
1) Ensure the headset is in OFF and unlock mode.
2) To activate the pairing mode, press and hold the headset’s MFB for 8 seconds. The
status indicator will flash blue and red alternately.
3) Activate your mobile phone’s Bluetooth, search Bluetooth devices, select
“MyVoice 610” and enter the passcode “0000”. When the pairing is completed, the
headset’s status indicator will flash blue rapidly 5 times and you can hear a long beep.
Basic Operation
Function
Button
Beep / Buzzer
Status indictor
POWER ON
Press and hold the
Short beep
Blinking Blue for 3
