Getting Started
Charging your battery
Turn on the GPS receiver
How to use the Solar Cell
To charge i.Trek Z1, please plug in USB cable to
the power source. Charging time is about 3~4
hours and you can charge from computer’s USB
port or from USB car charger.
For the 1st time you use the i.Trek Z1, please
charge battery until it is full (the green LED
blinks). The LED that represents the battery is
the left-most battery icon.
NAV Mode
Switch to Nav position (center) when you want
to use i.Trek Z1 as regular Bluetooth GPS
receiver. In NAV mode, the data logger function
is disabled.
LOG Mode
Switch to LOG position (left) when you want to
use the data logger function. In LOG mode,
both data logger and navigation functions are
enabled simultaneously.
Step 1: Initial State
Step 2: Rotate clock wise
Step 3: 180 degree
Step 4: Max. 270 degree
Step 5: General usage
Step 6: Change angle of elevation
