3
filled with water on top of the camera. Doing so may cause personal injury due to fir
e,
electric shock, or falling objects.
7.
If any unusual smells or smoke come from the unit, stop using the product.
In s
uch case,
immediately disconnect the power source and contact the service center. Continued use in
such a condition may cause fire
or electric shock.
8.
If this product fails to operate normally, contact the nearest service center
and never
disassemble or modify this product in any way. (I-View is not liable for problems caused by
u
nauthorized
modifications or attempted repair.)
9.
When cl
eaning, do not spray water directly onto parts of the product.
Doing so may cause
fire or electric shock.
CAUTION
Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibration or magnetic interference.
Do not install in a location subject to high temperature (over 50°C), low temperature (below
-
10°C), or high humidity.
Doing so may cause fire or electric shock.
If you want to relocate the already installed product, be sure to turn off the power an
d then
move or reinstall it.
Remove the power plug from the outlet when then there is a lightning. Neglecting to do so
may cause fire or damage to the product.
Keep out of direct sunlight and heat radiation sources. It may cause fire.
Install it in a place with good ventilation.
Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CCD image sensor.
Apparatus shall not be exposed to dripping or splashing and no objects fi
lled with liquids,
such as vases, shal
l be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
Do not expose the camera to radioactivity. Radioactivity exposure may damage the CCD.
Summary of Contents for ANYCAM DM-2MIPR04 Series
Page 18: ...18...
