5
4.
Ceiling/Wall Mount installation
a.
Attach the supplied alignment sticker for camera base to the ceiling/wall, using the
three circles on the sticker, drill three pilot holes into the ceiling. Then hammer the
four supplied plastic anchors into the holes and then secure the camera base to the
ceiling/wall with four supplied screws.
b.
Drill a cable hole on the ceiling/wall, and feed the cables through the hole, then
connect the Ethernet cable and the I/O cable to the socket.
c.
Attach the dome cover into the camera base.
d.
Secure the four screws with the supplied star driver. Make sure all camera parts are
securely installed.
