MAJ : 16.09.11
6
Set a heating program, according to your set of comfort periods, planned for weekends as
described in the previous section Daily program mode, then you will see the message if the heating
program should be copied to Sunday.
Set a heating program, according to your set of comfort periods, planned for weekends as
described in the previous section Daily program mode, then you will see the message if the heating
program should be copied to Sunday.
To activate the weekly program choose Activate and press the menu button. Should you fail to
activate your heating program within one minute, the device will return to operate in the previously
chosen mode; the data you entered will not be saved. This is also valid for the case when in the
course of program entering or moving through menus none of the buttons are pressed for one
minute. The activate command starts the weekly program set by you (or the previously saved
settings).
To activate the weekly program choose Activate and press the menu button. Should you fail to
activate your heating program within one minute, the device will return to operate in the previously
chosen mode; the data you entered will not be saved. This is also valid for the case when in the
course of program entering or moving through menus none of the buttons are pressed for one
minute. The activate command starts the weekly program set by you (or the previously saved
settings).
Please note: Should you fail to activate your heating program within one minute, the device will return to operate in the
previously chosen mode; the data you entered will not be saved.
Control of the heating system operating conditions
The
I-WARM 760©
thermostat permanently controls the operating condition of the heating system.
If the heating of the floor surface to the preset temperature appears to be impossible the
ATTENTION sign is displayed. This condition occurs, for example, when windows/doors are always
open, or in case the installed power of the heating system is not enough to achieve the desired
heating level in this room.
In case of a malfunction (cut-off or short-circuiting of connecting wires) during which normal
operation of the heating system is impossible, the thermostat turns the heating off and displays a
warning message. You should contact the manufacturer or your local dealer to repair or replace the
temperature sensor.
Setting of the common parameters of the thermostat
Several common parameters are valid for all thermostat operating modes. They can be set via the subdivision Settings and
limitation of the main Menu. There you can set a limit of maximum floor temperature (this may be important for some types of
floor coverings) and the indication of the device's operating mode: heating parameters, current time and date or current time (in
large print).
To set the common parameters, press the menu button while in the operating mode, and choose the
subdivision Settings and limitation and open by pressing the menu button.
The window to set the maximum floor temperature limit appears on the display. Press the selection
buttons to set the required value and press the menu button.
