MAJ : 16.09.11
7
The window for choosing the type of indication, in the device's operating mode, appears. The
following types of indication are available: a) «Clock» — displays the current daytime in large figures
b) «THERMOMETER» — displays the current roomtemeprature
c) «None» — the main indication window of the device indicates the heating parameters, the current
date and daytime
The device returns to it after pressing any key when the «Clock» screen is displayed and after using
the menu. If the indication type «Clock» is selected, the device turns to it after 40 seconds of pressing
any key. Press the selection buttons to choose the desired option of indication («screensaver») and
press the menu button. The display returns to the selection of the main Menu.
Select the item Save settings and exit and press the menu button The device now turns on its
operating mode with the entered common parameters.
Output of energy saving statistics data
The
I-WARM 760©
accumulates statistic data on the heating system operation, which allows you to evaluate the actual saving
benefit from the heat controller used in your heating system. The result is displayed by the thermostat is calculated by this
formula:
Saving during a time period = 100% - (Heating time during the time period/time period) * 100%
To display the statistics data press the Menu button when the
I-WARM 760©
is in the operating
mode, then choose the Statistics subdivision and press the menu button. Pressing the selection
buttons you can view the statistic data for 24 hours, for a week, or for a month. To exit from
statistics viewing mode press the menu button. In the main Menu go to the subdivision Save
settings and exit and press the menu button. The
I-WARM 760©
will return to its current operation
and indication mode.
Warranty
During the warranty period the customer has the right to get the product repaired or replaced due to faulty materials from the
manufacturer on the condition that the manual guides to Installation and Operation of this device have been followed. The
warranty policy does not cover thermostats with mechanical damage and in cases where the failure is a result of disregard for
operating conditions provided in this Manual, and/or instructions provided for device installation and electrical connections.
Reclamations :In case of failure during the warranty period of the device the customer must immediately apply to the
Manufacturer service center or to the regional authorized representative.
Apendix
Delivery set
Thermostat
I-WARM 760©
Temperature sensor (connection cable length 2 m) I
nstallation manual
Packing box
Installation manual
Important! Switch off the power before connecting or disconnecting wiring to the thermostat. A qualified electrician trained to
current Indoor Electrical Equipment regulations must install all wiring. We strongly recommend that you NOT to install the
thermostat in premises with high air humidity. It is prohibited to install the device in bathrooms, saunas, shower cubicles or
pools. The thermostat controlling heating in these premises must be installed in a neighbouring “dry room”.
Please study this manual carefully before starting the installation.
Tools and materials required for thermostat installation
1. Corrugated plastic tube not less than 16mm in diameter; the length depends on the distance between the thermostat
and the heating unit
2. Standard junction box for wall mounting units Screwdriver Phase voltage indicator
3. Screwdriver
4. Phase voltage indicator
